| This 52 message thread spans 4 pages: |
|
|
|
Author
|
|
|
|
| 4/6/2008 7:52:11 AM
|
|
hey guys i found a new site just for traxxas addicts like you www.traxxaddicts.com they have any answer your looking for and all the members are just great help. They know there stuff there.
WWW.TRAXXADDICTS.COM
|
|
|
|
| 4/29/2008 7:55:56 PM
|
|
does any one know where i can get performances parts for jato 3 3
|
|
|
|
| 4/29/2008 7:55:59 PM
|
|
does any one know where i can get performances parts for jato 3 3
|
|
|
|
| 4/29/2008 10:15:02 PM
|
|
What performance parts are you looking to get(engine, manifold, pipe, etc.)? I usually buy parts from amainhobbies.com, towerhobbies.com, or wherever I can find the part the cheapest.
|
|
|
|
| 4/29/2008 11:52:39 PM
|
|
I Find alot of my stuff on ebay, just search out jato 3.3 and 7-8 pages come up
|
|
|
|
| 4/30/2008 9:22:49 PM
|
|
http://www.rcxshop.com/
or
http://www.neweramodels.com/?session_id=
just copy and paste link's the first one has some cheep good quality parts..the 2nd has some never seen before parts..good luck..i also use ebay
|
|
|
|
| 5/3/2008 4:24:31 PM
|
|
www.integy.com is getting more and more aluminum parts these days. if your after an engine for it get a picco .26 maxx you dont need to modify anything to fit it in and upgrades it from a 3.3 to a 4.2. i don't see why some people are having so many starting problems... my glow plug has lasted for over 5 gallons of 20% nitro so far(McCoy plug)... I prefer to run traxxas fuel, but i i had a gallon of wild cat eliminator plus with 18% oil, with that my tmaxx went from 5-10 minutes of starting with a drill starter to less than 10 seconds. also try turning your high speed needle all the way lean then back it out 3.5 turns, I have done that a few times when my jato refused to start and it started right up.
|
|
| This 52 message thread spans 4 pages: |
|
|
|
|