<< back to the RC Blog

ElectriFly Riot 3D

If you are looking for new micro aerobat, the ElectriFly Riot 3D might just be for you!

Highlights:

- made of top-grade, laser-cut woods that is covered in heat-shrink film
- you should be in the air whithin 5 hours!
- easy to transport due to the one piece contruction
- comes in 2 colors, solid white or transparent yellow (you also get 4 decal sets so you can create your own custom look)
- formed wire landing gear, wheel pants and a full hardware package included by Great Planes.

From Great Planes:

"Hone your aerobatic skills indoors and out with the all-wood Riot 3D — an ARF electric whose compact size, innovative design and wide flight envelope suit it equally well for parks, arenas and flying fields. There’s plenty to appreciate: 4 linked ailerons for super roll rates and control at all flying speeds; oversized rudder and elevators for excellent pitch and yaw authority; and outstanding power and flight performance when equipped with an easy-to-install brushless out-runner motor."

The Riot 3D needs a brushless out-runner motor. Great Planes says the Rimfire 28-22-1380KV is a good motor for the job, delivering great power and flight performance.

Specifications:

SPECIFICATIONS
Stock Number: GPMA1570
Wingspan: 20.5 in (515 mm)
Wing Area: 235 sq in (15.2 dm2)
Weight: 7.4 oz (210-225 g)
Wing Loading: 4.5-4.9 oz/sq ft (14-15 g/dm2)
Length: 22.8 in (580 mm)
Requires: 4 channel radio w/3 micro servos, 8A micro brushless ESC, Slo-Flyer propeller, 350-640mAh 3-cell LiPo battery w/charger

The stock number for this plane is GPMA1570, with the transparent yellow being GPMA1571.